Serial boot logs

When connecting to the UART serial header, the following is printed to the console during boot:

Basic POST completed...     Success.
Last reset cause: Hardware reset (Power-on reset)

PSPBoot1.4 rev: 1.4.0.6
(c) Copyright 2002-2008 Texas Instruments, Inc. All Rights Reserved.


Press ESC for monitor... 1

(psbl)

Booting...
Attached TCP/IP interface to dummy unit 254
Attaching network interface lo0... done.

Adding 8764 symbols for standalone.
CPU: TI TNETV1057 Communication Processor.  Processor #0.
Memory Size: 0xffe000.  BSP version 7.2.7.20.


        ========================================================
        Board           : TI TNETV1057 Communication Processor
        SOC             : Titan, ChipId: 0x7, Version: 2
        Cache           : Write-Back, Write-Allocate
        PSP Version     : 7.2.7.20
        Type            : BasePSP 7.2.7.20 Patch
        PSPWIZ Version  : 0.5
        MIPS freq       : 87500000 Hz,
        System Freq     : 87500000->  Hz,
        VBUS freq       : 81250000 Hz
        BasePSP mode    : Routing
        ========================================================
Model no: 2
appCreate: autoBootLevel=2
MXP environment is created.
About to create Idle Task
About to create Measurement Task
Idle Measurement Tasks created
Panic button enabled
Heartbeat started
Creating Golden Gateway application...
Creating fs:/tmp 3145728
Decompress app module.... done
appmodule len=2770028
Creating fs:/DR 16384
/DR created
decompress constdat successfully:521344
flash_init . . .
  -- flash_raw_init . . .
  -- flash_fstr_init . . .
  -- flash_fsm_init . . .
  -- flash_license_init . . .
  -- flash_fpar_init . . .
  -- flash_custom_init . . .
  -- flash_fprv_init . . .
  -- flash_dhcp_prov_init . . .
flash_init done
0000008654 - DSPALLOC: AER instance 1, max_tail = 60 ms, usage = ( HS  HeS  GL_HS  GL_HeS )
0000008654 - DSPALLOC: AER instance 0, max_tail = 200 ms, usage = ( HS  HeS  HF  GL_HS  GL_HeS )